Fast, Reliable Home Energy Audit Across Enterprise
Enterprise is one of the fastest-built-out master-planned suburbs on Las Vegas’s south edge, and most of its attics were framed by production builders between roughly 1995 and 2020. That single fact shapes how we audit homes here. We’re looking for the compression and pull-back points tract crews left around HVAC platforms, chases and recessed cans, not diagnosing a century-old envelope. When you call (844) 320-5338, a live person answers, and we schedule an audit with a written price before anyone lifts a tool. Enterprise homes get a walk-through built around what’s actually in their attics.
Why Envelope Insulation Henderson Is Enterprise’s Preferred Home Energy Audit Company
Enterprise homeowners research before they call, and we’re built for that. Every applicable audit ends with before-and-after blower-door numbers you can read yourself. The reading is a pressurization measurement that shows, in one figure, how much conditioned air the building envelope is losing. When we find R-value gaps, they get documented in the photo record, not described in a sales pitch.
We seal first, then insulate, in that order. We will never blow insulation over an unsealed attic floor, and we’ve completed 9,000+ homes that way under The Haven Standard, with a written price before work starts and a documented record when the crew leaves. Our technicians have up to 10 years of experience reading these 2005-era attics. The 365-Day Done Right Promise applies to all completed work. Bring us a competing estimate and we’ll read it with you as a free second opinion.
Our Home Energy Audit team knows the south-valley tract layout, from the 89139 ZIP up through the newer phases. Calls are answered 24/7, and scheduling is a text away if that’s your preference.
Our Home Energy Audit Services in Enterprise

We focus an Enterprise audit on heat load and air leakage, because dry Mojave air rarely creates the moisture problems that drive audits in other climates. Here’s what the visit covers.
Blower Door Test
A blower door test pressurizes the whole house and gives one number for envelope leakage, measured in CFM50. In Enterprise we run it on every applicable audit so you can see the before figure, then the after figure once air sealing is done. It’s the only honest way to prove you got what you paid for.
Thermal Imaging Inspection
Infrared cameras let us see where hot attic air is pushing into living space, and the images usually land right on the compression points we expected. On a two-story Enterprise plan, the upstairs ceiling and knee walls often show the brightest readings. Every image goes into your documented photo record.
Insulation Inspection
We measure what’s actually there, not what the builder’s spec sheet claims. Original R-13 to R-19 batts are common in these homes, and they’re frequently compressed or pulled back around HVAC platforms and recessed cans. We note the gaps and the depth, then recommend a code-current R-value.
Duct Leakage Test
Duct joints in a 150°F-plus attic leak constantly, and every degree of cooling lost up there shows up on your July bill. We pressure-test the duct system to quantify the loss before recommending sealing. In a typical 2005-era Enterprise two-story, leaky ducts plus pulled-back batts explain most of a climbing summer bill.
Trusted Brands We Service in Enterprise
We source materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec and GreenFiber, which means no proprietary lock-in and a recommendation based on your attic rather than a brand quota. We don’t stock parts in Enterprise; when an audit calls for blown-in or batt upgrades, we specify the material for your R-value target and order it to the job. Knauf and Rockwool batts are common choices for the tighter cavities in these tract homes. Turnaround is quick because the audit findings drive the order, and the order doesn’t happen until you’ve approved the written price.
Common Home Energy Audit Problems We See in Enterprise Homes

- Visual-only audits that skip the blower door. A look in the attic misses the duct and chase leakage that drives most summer heat gain in these tract houses. Without a pressurization reading, the report can’t tell you how leaky the envelope really is.
- Compressed or pulled-back batts nobody flagged. Original R-13 to R-19 insulation was often shoved aside around HVAC platforms and recessed cans, so the report understates the actual R-value gaps right where the heat gain is worst.
- Mold-hunt framing on a desert home. Treating an Enterprise audit as a moisture and mold inspection is backwards for dry Mojave conditions. The real question is heat load and air sealing, and an audit built around moisture wastes the visit.
- 150°F-plus attic conditions ignored. When attic temperatures routinely exceed 150°F in July, settled insulation and unsealed penetrations do more damage than they would in a milder climate. An audit that doesn’t account for that heat load isn’t giving you the full picture.
Pricing for Home Energy Audit in Enterprise, NV
Most blower-door-and-thermal-imaging audits in Enterprise run $300 to $550 depending on square footage and how many zones we test. Adding a duct leakage test typically lands the full package between $450 and $750. Insulation work recommended off the audit is priced separately: an attic top-off in a typical Enterprise home usually runs $1,800 to $4,200, and air sealing of top plates, cans and penetrations runs $600 to $1,400. The written price comes before any work starts, always, and the free second opinion applies to any competing estimate you bring us. Call (844) 320-5338 for an exact number on your home.
We Also Serve Cities Near Enterprise

We work just past the Enterprise line too, including Spring Valley, Paradise, Winchester and Henderson, with the same written-price-first process and the same documented photo record. If you’re in one of those areas and want an audit built around your attic’s actual condition, we’ll schedule you the same way. The same team covers Enterprise and its neighbors, and you can read more about Home Energy Audit in Enterprise on our city page.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Home Energy Audit in Enterprise

Production-built Enterprise homes carry builder-grade shortcuts that older custom homes sometimes escaped, so the audit is a search-and-document job hunting specific compression and pull-back points. Nearly every roof here went up at tract scale between 1995 and 2020, and crews commonly left batts compressed around HVAC platforms, chases and recessed cans. That means an audit here finds real R-value gaps right where summer heat gain is worst. Call (844) 320-5338 to book one, and estimates are free.
Yes, and often more than homeowners expect. Newer construction still leaks at top plates, can lights, chases and duct joints, and in a 2005-era Enterprise attic those leaks sit under 150°F-plus summer heat. The blower door gives one CFM50 number showing exactly how much conditioned air you’re losing. Call (844) 320-5338 for an exact quote on your home; estimates are free.
Enterprise summer highs routinely top 105°F and attic temperatures can pass 150°F, so an audit here has to center on heat load and air sealing rather than moisture. We check duct leakage and insulation depth first, because that’s where the cooling loss concentrates in these tract attics. Scheduling is a text or a call at (844) 320-5338, and estimates are free.
You should expect a blower door test, thermal imaging, an insulation inspection with measured R-values, and a duct leakage test, followed by a documented photo record and a written scope. Every applicable job also gets before-and-after blower-door readings so you can verify the air-sealing result. Call (844) 320-5338 and we’ll walk you through the scope before we arrive; estimates are free.
It does. In low-humidity Mojave air, sealing and blown-in upgrades deliver more value than moisture-driven fixes, so we recommend to a code-current R-value based on heat load. A typical 2005-era Enterprise two-story usually needs the R-value gaps corrected and a blown-in top-off rather than a full removal. Call (844) 320-5338 to get an exact quote for your attic; estimates are free.
Ready to see what your attic is actually doing? Call Envelope Insulation Henderson at (844) 320-5338 for a free estimate on your home energy audit in Enterprise. You’ll get a written price before any work starts, a documented photo record, and before-and-after blower-door numbers on applicable jobs, backed by the 365-Day Done Right Promise.
Written by the team at Envelope Insulation Henderson.