Trusted Attic Air Sealing for Henderson Homeowners
If your Henderson home runs hot in July and cold in January no matter what the thermostat says, the attic floor is usually the reason. Air sealing closes the gaps that let conditioned air escape upward before it ever cools or heats the rooms you’re paying to keep comfortable. It’s the first step that makes every other efficiency upgrade work, and we treat it that way.
Our technicians have up to 10 years of experience and use blower-door testing to measure exactly how much air your home leaks, before and after. Our techs are background-checked, and calls are answered by a live person 24/7. We see the same patterns across the valley, from Green Valley to Anthem: a home built in the 2000s, a few visible gaps around recessed lights, and a year-over-year utility bill creep the family can’t explain. Call (844) 320-5338 and we’ll tell you what the numbers should look like.
What Our Attic Air Sealing Service Includes
Air sealing is not a single task. It’s a set of specific closures done in a specific order, and each one addresses a different path for air to move between the living space and the attic. Here’s what we do on a typical Henderson home.
Attic Floor Air Sealing
Attic floor air sealing means closing the gaps and cracks in the ceiling plane itself, the drywall that separates your living room from the attic above. You need it when your home shows a persistent stack effect, where warm air rises through the ceiling in winter and pulls cold air in through lower leaks. We foam every floor penetration and any open seams we find, and we use your blower-door readings to confirm the total leakage dropped. Many Henderson homes built between 2003 and 2018 have noticeable gaps around plumbing chases that never show up on a visual walkthrough.
Top Plate & Penetration Sealing
Top plate sealing closes the gap where the wall framing meets the ceiling framing, a narrow but continuous path for air to bypass the drywall entirely. It matters most in homes with exterior wall outlets, recessed light cans, and plumbing and wiring runs that punch through the plate. We seal the top plate at the interior side of every exterior wall, plus every wire and pipe penetration, then verify the result with a second blower-door reading. It’s the kind of work that takes longer than it sounds like it should, and it’s the reason a sealed home reads lower on the door than a house where someone just sprayed foam around the obvious holes.
Can Light & Duct Boot Sealing
Recessed can lights are notorious attic leaks because most builder-grade units aren’t rated airtight, and the gap around the housing opens directly into the attic. Duct boots, the metal fitting where a supply register connects to the ductwork in the ceiling, often have gaps where the boot meets the drywall. We build a sealed cover over each can light housing and seal the boot perimeter, all without sacrificing access for future bulb changes. If you have a home in Seven Hills or Sun City with lots of recessed lighting, this is usually the biggest single reduction we record.
Attic Hatch Sealing
Your attic hatch is a door to the outside, from a pressure standpoint, and the average Henderson hatch leaks like an open window. You need it sealed when the hatch cover sits loosely in its frame, when there’s no insulation or weatherstripping on the back of it, or when you can feel air moving past it on a windy day. We weatherstrip the hatch frame, insulate the hatch cover, and add a latch to hold it tight. It’s a small item with a surprising effect on whole-home leakage, and it’s included in every air-sealing job we do.
Brands We Service for Attic Air Sealing

Sealing work touches the products already installed in your attic, so we know where each brand’s material tends to fail. Owens Corning fiberglass batts, for example, flatten and compress when air moves over them, so a sealed attic floor keeps that insulation performing the way it was rated to. Johns Manville and Knauf products hold up well in Henderson’s dry heat, but the gaps at penetrations are the same size regardless of who made the insulation sitting next to them.
Rockwool mineral wool batts are a favorite in this market because they resist moisture and don’t sag the way some fiberglass does, and our attic air sealing complements that strength by making sure the air stays where it belongs. Whether your attic has Owens Corning, Johns Manville, Knauf, Rockwool, or any other make, we can help you figure out what’s worth keeping and what should come out before new material goes in. We source from these manufacturers directly, and we don’t lock you into a proprietary product line.
Signs You Need Attic Air Sealing Right Now
Homeowners often mistake these warnings for normal wear and tear. They’re not. Each one points to a specific, measurable leak.
- Dust streaks or dark stains around recessed lights and ceiling fixtures. That’s attic air and insulation fibers being pulled into the living space through a gap. Sealing the fixture stops the flow, and the stains stop forming.
- Rooms on the upper floor never quite match the thermostat. When the second story runs 4 or 5 degrees off from the first, the ceiling plane is usually leaking. It’s the most common complaint we hear from Henderson homeowners in two-story floor plans built in the last two decades.
- Utility bills creep upward every summer. A few percent each year can point to a growing leak. We compare your current bills against what a sealed, insulated attic should produce and tell you the gap.
- Drafts near the attic hatch or around ceiling can lights. If you can feel air moving on a windy day, the leak is real. A blower-door test will tell you how much total leakage is coming from those spots.
- Insulation that moves or appears disturbed after wind events. Loose insulation indicates air is pushing through the attic floor. In Henderson, spring dust storms regularly uncover the pattern, and the fix is sealing before any new insulation goes down.
Our Attic Air Sealing Process – Step by Step

- 1
Inspection and written scope. We walk the attic, photograph the leaks, and hand you a written price before any work starts. Haven Standard Clause 1: flat price, written scope, written warranty before anyone lifts a tool. You’ll know the dollar amount and the exact closures in writing.
- 2
Blower-door baseline. We set up the blower door, a pressurization rig that depressurizes the house to a standard reference pressure, and record the starting CFM50 figure. That number, in one place, tells you how much air the building envelope is losing before we touch anything.
- 3
Air sealing, top to bottom. We work the attic floor, top plates, can lights, duct boots, and hatch in one pass, using closed-cell foam for structural gaps and weatherstripping for the hatch. Every closure is photographed, and you’ll see it in the Documentation Photo Record we leave behind.
- 4
Re-test and verify. We re-run the blower door after the seals are done and record the new reading. Before-and-after numbers go on the written report, so you can see what changed in a single figure rather than taking our word for it.
- 5
Wrap-up and warranty handoff. We deliver your documentation package, including photos, both blower-door readings, and the written warranty. The 365-Day Done Right Promise covers the work: if something isn’t done right, we make it right. If your attic also needs new insulation, we can quote it in the same visit.
How Much Does Attic Air Sealing Cost in Henderson?
Attic air sealing in Henderson typically runs $850 to $2,400 depending on square footage, the number of penetrations, and whether you combine it with insulation. A typical single-story home around 1,800 square feet with standard can lights and a simple hatch runs $850 to $1,300. Homes closer to 3,000 square feet with heavy recessed lighting and multiple plumbing chases land in the $1,600 to $2,400 range.
| Scope item | Typical price range (Henderson) |
|---|---|
| Attic floor air sealing (basic) | $450 – $900 |
| Top plate & penetration sealing | $300 – $700 |
| Can light & duct boot sealing (per fixture) | $30 – $65 |
| Attic hatch sealing & insulated cover | $180 – $350 |
| Combined package with insulation | $1,800 – $3,800 |
What affects the price: how many penetrations the blower door reveals, the number of recessed lights, whether we can access everything without cutting into drywall, and whether insulation needs to be pulled back and replaced. You avoid overpaying by getting the blower-door readings first so we can quote from measured data, not a walkthrough guess. Every estimate is free and includes your written price, written scope, and written warranty before anything starts. Bring us a competing written estimate and we’ll read it with you at no charge, which is a free second opinion on any written estimate you receive. A home energy audit will also flag where the leaks really are in your specific home.
Attic Air Sealing Near Henderson – Our Service Area

We work throughout the Henderson area and the surrounding neighborhood markets, including Whitney, Paradise, Winchester, Enterprise, Sunrise Manor, and Boulder City, plus Spring Valley, Summerlin, North Las Vegas, Las Vegas, and Sandy Valley. Most appointments in Henderson proper are scheduled same day or next day, and outlying areas like Boulder City typically see us within 24 to 48 hours. If you want the broader picture on how air sealing fits into a full attic insulation upgrade, see our home page for the full service list.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Attic Air Sealing in Henderson

Attic air sealing is the process of closing the gaps, cracks, and penetrations in your attic floor and ceiling plane that let conditioned air escape into the attic. It’s different from insulation, which slows heat transfer but doesn’t stop air flow. We seal first, then insulate, because insulation blown over an unsealed attic floor just lets air flow right through it. Your blower-door readings show how much leakage was closed.
Most homes take 4 to 8 hours on the day of service. A single-story home around 1,800 square feet usually runs on the shorter end, while a two-story with a lot of recessed lighting runs longer. We schedule the full day, not an afternoon, so we’re never rushing the re-test. Call (844) 320-5338 if you want to talk through timing for your specific home.
Typical pricing runs $850 to $2,400, depending on home size and the number of penetrations. Combining it with insulation or a crawl space encapsulation package can bring the per-item cost down. Every written price includes the scope and warranty. Call (844) 320-5338 for an exact quote, and a free second opinion if you already have a written estimate.
Yes, we work with Owens Corning and with Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber materials. Sealing work doesn’t depend on the brand of insulation already installed, but we can tell you whether the existing material is worth keeping or should be replaced. There’s no proprietary lock-in, and we’re not going to upsell you a brand that doesn’t fit the job. Call us and we’ll talk through what’s in your attic.
Same-day scheduling is often available in Henderson, and a live person answers every call 24/7. Non-emergency work is usually scheduled same day or next day. True emergencies, like a burst pipe in the attic, go straight to an emergency plumber before any sealing work. Call (844) 320-5338 and we’ll tell you what’s realistic for your address today.
Every completed job is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right. The written warranty is delivered before work starts, hand-in-hand with your written scope. You keep the documents, the before-and-after blower-door readings, and the Documented Photo Record. Call (844) 320-5338 and we’ll walk you through what’s included.
Clear access to the attic hatch, and move anything stored in the first few feet of the attic away from the hatch opening. Close windows and doors for the blower-door test to read correctly. Beyond that, nothing else needs to change; we handle the drop cloths and cleanup. If your children or pets are home, plan for noise and equipment, and call (844) 320-5338 if you have questions about the day.
Schedule Your Attic Air Sealing Service in Henderson Today
If your attic is leaking, every month you wait costs you on the utility bill. Call (844) 320-5338 and we’ll set up a no-obligation estimate, in writing, before any work starts. A live person answers 24/7. Expect a written price, a documented photo record, and before-and-after blower-door numbers when we leave. That’s the deal, every time.
Written by the team at Envelope Insulation Co.