How Much Does Attic Insulation Cost in Henderson?
Attic insulation in Henderson typically costs $1,600 to $4,200 for most single-family homes, with the average job landing near $2,600. That figure covers air sealing of the attic floor first, then blown-in insulation to reach the current energy code target for our climate zone. Larger homes, spray foam upgrades, and full removal-and-replace jobs push toward the top of that range; a straightforward top-off on an already-sealed attic can come in under $1,900.
Those numbers reflect southern Nevada pricing in 2026, including labor, materials, and disposal. What they don’t reflect is a variation that shows up on almost every job we quote in Henderson: the attic floor that hasn’t been air sealed yet. Until the top plates, can lights, and pipe penetrations are closed, adding insulation mostly buys you a thicker blanket over a drafty floor.
Attic Insulation Cost Breakdown (2026)
Our written prices in Henderson break down by line item, so you can see what each part of the job costs before anyone lifts a tool. Here’s the range we’re seeing across the metro this year:
| Line item | Typical range | Notes |
|---|---|---|
| Attic air sealing (top plates, can lights, penetrations) | $450 – $1,100 | Done first, always. Billed by the number of penetrations and access difficulty. |
| Blown-in fiberglass insulation (R-38 to R-49) | $1,100 – $2,400 | Most common choice for Henderson attics. GreenFiber and Owens Corning products. |
| Blown-in cellulose insulation (R-38 to R-49) | $1,200 – $2,600 | Slightly denser, good for older attics with uneven framing. |
| Spray foam insulation (attic floor or roofline) | $2,800 – $6,500 | Higher upfront cost, sealed assembly, better for vaulted ceilings and duct-in-attic homes. |
| Old insulation removal and disposal | $600 – $1,800 | Required when existing material is contaminated, wet, or heavily compacted. |
| Radiant barrier installation | $1,200 – $2,200 | Effective in Henderson’s summer sun when paired with proper attic ventilation. |
| Attic cleaning and rodent proofing | $800 – $2,000 | Often bundled with removal. Sealing entry points is part of the work, not an add-on. |
| Blower-door test before and after | Included | Standard on applicable jobs. You get the before and after reading in writing. |
What drives the price up: heavier existing insulation that has to come out, low-clearance attics where the crew works on their stomachs, multiple roof pitches, and any electrician or HVAC coordination needed before sealing. What brings it down: an attic that’s already partially sealed, easy roof access, and choosing fiberglass over foam. None of those change the order of work. Insulation goes in after sealing, not before.
What Affects Attic Insulation Pricing in Henderson

Every quote we write in Henderson changes based on the same handful of factors. Here they are, in the order they usually move the number:
- Current R-value and how far you’re going. R-value is the measure of how well a material resists heat flow – the higher the number, the better the resistance. A Henderson attic built to an older standard might sit at R-11. Bringing it to today’s target of R-49 in our climate zone takes more material than a top-off from R-30. That delta is usually the single biggest line on the quote.
- Attic access and clearance. A 22-inch scuttle in a hallway closet is not the same job as a full pull-down stair with a clear path to the ridge. Low-clearance attics, common in older Henderson ranch homes, add labor hours because the crew can’t stand up to work.
- How much air sealing is needed. A 1990s builder-grade attic in Green Valley might have forty can lights and every top plate wide open. A sealed attic in a newer build near Lake Las Vegas has far fewer leaks. Air sealing is priced by the number of penetrations, so this number swings the total more than insulation itself.
- Duct placement. If the air ducts run through the attic, sealing and insulating around them adds labor. Ducts in a 110°F attic lose cold air before it reaches the register, and closing that gap is part of the envelope work.
- Material choice. Blown-in fiberglass is the most economical. Cellulose runs a little higher. Spray foam is the largest investment but seals on contact, which matters in attics with unusual shapes or vaulted ceilings. We source from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so the material choice isn’t locked to one brand.
- Condition of what’s already there. Wet, compacted, or rodent-contaminated insulation has to come out before anything goes in. That removal line is real, and skipping it hides a problem rather than solving one.
What we don’t change: the order. Our attic insulation work in Henderson always starts with air sealing. We won’t blow insulation over an unsealed attic floor, because doing so buries the leaks and makes the next person’s job harder to price.
How to Save on Attic Insulation
There are a few real ways to bring the number down without cutting corners on the work that matters:
- Get a written second opinion. Bring us a competing estimate and we’ll read it with you, line by line, at no charge. A second set of eyes on a quote catches line items you didn’t ask about and confirms the R-value is right for the target. This alone has saved Henderson homeowners real money on jobs that were overscoped.
- Bundle sealing and insulation. Quoting air sealing and insulation together is cheaper than two separate visits, and the sealing has to happen first anyway. It’s one mobilization, one crew, one written record.
- Ask for the blower-door numbers. Under The Haven Standard, every applicable job includes before-and-after blower-door readings – a pressurization test that shows, in a single figure, how much conditioned air the home was losing before and after. If a competitor doesn’t offer it, ask why. A contractor who can’t quantify what they changed can’t prove what you paid for.
- Don’t skip the sealing to save a few hundred. Blowing insulation over unsealed leaks adds thickness without stopping air movement. The attic gets hotter, the HVAC works harder, and you end up paying twice: once for the insulation and once to redo it after someone finally seals the holes.
- Time the work before summer. Henderson attic temperatures routinely top 140°F in July. Scheduling a spring install means cooler working conditions for the crew, which sometimes trims labor on tighter attics.
Every one of these starts with a written price. No work starts without one. Call (844) 320-5338 for a free estimate and we’ll hand you a flat number, a written scope, and the warranty in writing before anyone climbs into the attic.
FAQs – Attic Insulation Cost

Is it cheaper to repair or replace attic insulation in Henderson?
Repair is cheaper in about half the cases we see. A top-off on an attic that’s already sealed and dry runs $1,100 to $1,900. Full removal and replacement with clean material runs $2,400 to $4,200. The deciding factor is condition: wet, compacted, or rodent-contaminated insulation has to come out. Sealed, dry insulation in good shape usually just needs topping up. Call (844) 320-5338 and we’ll give you the written price on both options so you can compare them side by side.
How much does it cost to insulate a 1,500-square-foot attic in Henderson?
A 1,500-square-foot Henderson attic typically runs $2,200 to $2,900 with air sealing included, assuming an R-49 target and no removal work. Without sealing, the insulation alone drops to about $1,500 to $1,900 – but we won’t quote it that way, because the sealing is the part that actually reduces air loss. Call (844) 320-5338 for an exact figure on your address.
Can you insulate my attic the same day I call?
Usually within a few business days, and same-day for smaller top-offs when the schedule allows. A live person answers calls 24/7, so you’re not waiting on a callback window. Every job starts with a written price and ends with a documented photo record. Call (844) 320-5338 to check the current week.
Does Henderson’s climate make attic insulation more expensive?
No. The price range is roughly the same as the rest of the Las Vegas Valley. What’s different here is the work order. Our summers push attic temperatures past 140°F, so the sealing has to be airtight – one unsealed can light bleeds cooling all summer. We test with a blower door before and after to confirm the sealing worked, and those readings are included, not billed separately. Call (844) 320-5338 for a free estimate.
What’s included in your written price?
Every written price from us includes the flat dollar figure, the written scope of work, the warranty, the material specification, and the documentation you’ll receive when the crew leaves: photos and the before-and-after blower-door readings. That’s Haven Standard Clause 1 – flat price, written scope, written warranty before anyone lifts a tool. The 365-Day Done Right Promise backs every completed job. Call (844) 320-5338 to schedule an estimate.
What the Documentation Looks Like When We Leave
The number on your quote is only part of what you carry away. When our technicians leave a Henderson attic, you get the full record: the before and after blower-door numbers, a photo set documenting every sealed penetration and the final installed depth, and the written warranty covering the work. Our technicians have up to 10 years of experience, and each job is background-checked and scheduled with a text when they’re on the way. The record exists so you can see, in numbers, what changed – not so you take our word for it.
We’ve sealed and insulated more than 9,000 homes since 2016, every one with a written price before work started and a documented record when the crew left. The blower-door test – a pressurization reading that shows, in a single number, how much air the building envelope was losing – is the piece most homeowners don’t see on a competitor’s quote. On applicable jobs, we publish it on both ends of the work.
Before You Compare Quotes in Henderson

Three questions separate the prices that hold up from the ones that don’t. First: does the quote include air sealing before insulation, or is it priced as an optional add-on? If it’s optional, it’s only sometimes done, and an unsealed attic gets a thinner blanket than the insulation contractor’s math implies. Second: is the R-value stated, and does it match our climate zone target? Third: will you receive blower-door numbers, or just an invoice?
Ask all three of every contractor you call, and bring the written estimates back to us. Our Attic Insulation in Henderson page goes deeper on the sealing order and the material options we install. Between that page and this one, you should be able to read any Henderson quote and know exactly what’s included.
If you want a second opinion on someone else’s written estimate, bring it in. We’ll read it with you, point out what’s included and what’s been left out, and give you our own written price to compare. No cost, no pressure.
Frequently Asked Questions About the Method
Why does Envelope Insulation Co. refuse to insulate before sealing?
Insulation works by slowing heat flow, but it doesn’t stop air movement. If the attic floor has open top plates, unsealed can lights, and gaps around pipe penetrations, conditioned air flows right through the insulation stack. Blowing insulation over those gaps gives you the appearance of a thicker blanket without the performance. Sealing first is the whole reason the finished R-value delivers the result the homeowner paid for.
What is the 365-Day Done Right Promise?
If it’s not done right, we make it right. The scope is written down before work starts, the warranty is signed, and if something fails within the year, the correction is on us. The promise is only as good as the paperwork behind it, which is why the written scope and written warranty precede any work.
How do I read a blower-door report?
A blower-door reading is measured in CFM50 – cubic feet per minute moving through the envelope with the house pressurized to 50 pascals. Lower is better. A typical Henderson attic in a 1990s build might read 3,500 to 4,500 CFM50 before sealing and drop to roughly half that after. The exact percentage depends on the home and how much of the envelope is being addressed. We publish both numbers so you can see the delta.
Can a competitor beat your price?
Sometimes, on paper, yes, particularly when a quote leaves out air sealing. We’ll read any competing written estimate with you, at no cost, and point out what’s included and what isn’t. If someone truly delivers the same scope for less, take the better deal. If the numbers don’t hold up once the missing work is priced, ours usually does. Call (844) 320-5338 to schedule a free second opinion.
Get a Written Price for Your Henderson Attic

Call (844) 320-5338 for a free estimate. You’ll get a flat price in writing, a written scope of work, the warranty, and the documentation you’ll receive when the crew leaves – before anyone climbs into the attic. A live person answers the phone, any hour. If you already have a written estimate from another insulation contractor, bring it in and we’ll read it with you at no charge.
Whether you’re in Green Valley, Anthem, Lake Las Vegas, a Henderson ranch home off Water Street, or a newer build in Inspirada, the process is the same: a written price, sealing first, insulation second, and a documented record of both.
Written by the team at Envelope Insulation Co.
Pricing reflects the Henderson market as of 2026. Envelope Insulation Henderson offers free estimates – call (844) 320-5338.
What Our Customers Say
"The winter gas bill dropped by about a third. They had estimated a quarter, so they under-promised."
- Genevieve R."They air-sealed the attic floor before insulating and showed me the blower-door number before and after. The upstairs is finally the same temperature as downstairs."
- Marisol D."Crawl space encapsulation done properly. Photographs of the vapour barrier at every seam, and the damp smell in the hallway is gone."
- Ainsley P.