Frequently Asked Questions
Most homeowners who call us about insulation in Henderson have already read a dozen pages that say the same things. This hub collects the questions we actually get asked, grouped by topic, and answers each one directly first. If you’d rather just get a number, most attic insulation jobs in a home this size run between $1,900 and $4,800, and a written price comes before any work starts.
Key Takeaways
- Attic insulation in Henderson typically runs $1,900 – $4,800 depending on square footage, existing insulation, and whether air sealing is needed first.
- No work starts without a written price and written scope. That’s Haven Standard Clause 1.
- We seal the attic floor before any insulation goes in. Blowing insulation over an unsealed attic is how you waste money.
- On applicable jobs, you get before-and-after blower-door readings so you can see the CFM50 change you paid for.
- Calls are answered by a live person, and our technicians have up to 10 years of experience.
Pricing & Estimates
How much does insulation service cost in Henderson?
Insulation service in Henderson typically ranges from about $600 for a small crawl space vapor barrier to $9,000 or more for full spray foam on a large attic, with most attic jobs landing between $1,900 and $4,800. The price depends on three things: square footage, what’s already there (old insulation, water damage, rodent debris), and whether the attic floor needs air sealing before insulation is added. Henderson homes built between 2015 and 2025 in master-planned communities like Cadence and Inspirada often have attic floors that were insulated but never sealed, which changes the scope.
Here’s a rough line-item table from jobs we’ve run in the Henderson area:
| Service | Typical range |
|---|---|
| Attic air sealing (top plates, can lights, penetrations) | $400 – $1,200 |
| Blown-in fiberglass or cellulose (R-38 to R-49) | $1,400 – $3,200 |
| Attic insulation removal and replacement | $2,200 – $5,500 |
| Spray foam insulation (open or closed cell, attic or wall) | $3,000 – $9,000 |
| Wall insulation (blown-in, drilled and patched) | $1,800 – $4,500 |
| Radiant barrier installation | $1,200 – $2,800 |
| Crawl space encapsulation and vapor barrier | $2,500 – $7,500 |
| Home energy audit (blower door, thermal imaging) | $350 – $650 |
These are ranges, not quotes. A written price is what you’ll actually work from, and we put it in writing before anyone lifts a tool. If you have a competing written estimate, bring it to us for a free second opinion and we’ll read it with you, line by line, so you can compare scope to scope. Call (844) 320-5338 for an exact quote – estimates are free.
Do you offer free estimates?
Yes. Every estimate we produce is free, and it arrives as a written price with a written scope and a written warranty. The estimate is not verbal, not a “ballpark after we look at the attic,” and not subject to a follow-up phone call where the number changes. If a contractor can’t put the number on paper before work starts, that’s a sign to keep looking. Under Haven Standard, the written price before any work starts is the first clause, not a nice-to-have.
Is it cheaper to repair or replace attic insulation in Henderson?
In most Henderson homes, it’s cheaper to add to existing insulation than to remove and replace it, unless the existing insulation is contaminated with rodent waste, water damage, or mold. If the insulation is clean and settled, blowing in additional material to reach R-49 is usually $1,400 – $3,200 versus $2,200 – $5,500 for a full removal and replace. The exception is anything built in the 1990s or earlier where we regularly find rodent tunnels through the fiberglass. In those cases, replacement gets you to a clean, sealed, documented attic floor rather than covering over a problem.
Call (844) 320-5338 with the approximate square footage and we can tell you which side of the range your home likely falls on before we come out.
What’s the blower-door test and why does it matter to my bill?
A blower-door test is a pressurization measurement that shows, in a single CFM50 number, how much conditioned air your building envelope is losing. On a recent Henderson job, the reading was 4,200 CFM50 before we sealed and 2,100 after. Those two numbers tell you what the work actually did, not what we felt about it. We publish before-and-after readings on every applicable job so you have a documented record of the change, and it’s included in the Documented Photo Record we leave with you at the end.
Service & Scheduling

How fast can you respond?
For non-emergency work we typically schedule an on-site assessment within a few business days, and most full jobs are completed within 1 – 2 days of arrival. When you book, you get a named technician and a text when they’re on the way. Calls are answered by a live person, not a voicemail loop, and we don’t give callback windows measured in business days. If you’re comparing us to an installer who says “sometime next week,” ask them for the text-on-my-way step and see if they can commit to it.
Do you offer emergency insulation service?
We don’t run a 24/7 emergency dispatch because insulation isn’t a burst-pipe problem – a bad attic can wait a scheduled visit without causing further damage. What we do handle quickly: rodent-torn insulation that’s letting hot attic air into a nursery or bedroom, a vapor barrier that’s failed and is pulling moisture into a crawl space, and post-storm ceiling leaks that have soaked insulation and need it removed before mold sets in. Call (844) 320-5338 and we’ll tell you on that first call whether it’s a same-week or next-day situation, without a sales pitch.
What areas do you serve?
We serve homeowners across Henderson and the surrounding Las Vegas Valley, including Green Valley, Anthem, Seven Hills, MacDonald Ranch, Cadence, Inspirada, Lake Las Vegas, and the neighborhoods along the 215 and I-11 corridor. If you’re not sure whether your address is in our service area, call and we’ll tell you in one sentence. If your home is in a community like Cadence where the housing stock was mostly built after 2015, the attic typically has insulation but no air sealing, which is a different scope than a West Henderson home built in the 1990s.
Can you visit while I’m at work?
Yes, as long as we can access the attic or crawl space and you’re comfortable with the technician working while you’re away. We send a text when the technician is on the way, and you get the Documented Photo Record when the job is done whether you were home or not. The photos show the before and after of the attic floor, the sealed penetrations, and the installed insulation depth. You can review the record in the evening and call with questions – a live person picks up.
Do I need to clean out the attic before you arrive?
No. The technician will move or work around stored items and re-stack them at the access. The exception is anything that blocks the attic access hatch itself – if it’s buried under boxes, a few minutes of your time before we arrive speeds up the job. We photograph the access area before and after so nothing gets lost, and we note in the written scope if anything needs to be relocated or handled differently on the day.
Licensing & Trust
Are you licensed and insured?
Yes. Envelope Insulation Co. is a licensed insulation contractor, and we carry both general liability insurance and workers’ compensation coverage for every technician on site. Ask for the certificate before any crew arrives, and we’ll send it. Insured and bonded sounds reassuring from any contractor – the specific certificate is what actually protects your home if a technician is injured or a fixture is damaged. Our technicians have up to 10 years of experience and are background-checked. We’ve sealed and insulated more than 9,000 homes since 2016, each one with a written price before work started and a documented record when the crew left.
Do you guarantee your work?
Yes. Every completed job is covered by our 365-Day Done Right Promise – if it’s not done right, we make it right, within a year of the work. The guarantee is written, not verbal, and it’s part of the written scope and warranty you receive before anyone lifts a tool. That’s Haven Standard Clause 1: written price, written scope, written warranty before work starts. If an installer tells you “we stand behind our work” but can’t hand you the warranty language on paper, that’s a different product than what we sell.
What payment methods do you accept?
We accept all major credit and debit cards, ACH bank transfer, check, and financing on larger jobs. Payment terms are spelled out in the written scope before work starts – no surprise deposits, no cash-only arrangements, and no “we’ll settle up after” conversations at the end of the day. If you’re financing a larger crawl space encapsulation or spray foam job, we’ll walk you through the options before you sign the scope.
Can I see examples of your before-and-after blower-door readings?
Yes – and we’d rather show you the readings than describe them. On applicable jobs, we publish the CFM50 number from before sealing and the number after, side by side, so you can see the change the homeowner paid for. Ask us for a sample from a home in your Henderson neighborhood and we’ll pull one. Reading a CFM50 drop from 4,200 to 2,100 tells you something a photo caption can’t: how much conditioned air the envelope was leaking before and how much it’s leaking now.
How is an estimate different from a proposal?
An estimate is the price; a proposal is the price plus the written scope, the written warranty, and the documented record you’ll receive. We deliver both before work starts, and the proposal is what you and the technician work from on the day. That’s why we say the written price is the foundation of the job – it isn’t a step in the sales process, it’s the contract. A contractor who offers a verbal estimate and a handshake is offering you a different risk profile than one who hands you a written scope and a warranty.
Specific Insulation Services

Do you handle attic insulation?
Yes. Attic insulation is our most common job, and it starts with air sealing before any insulation is added. In Henderson, we regularly see spring failures in older attics where the top plates were never sealed and can lights were left open to the attic – the insulation looked fine, but the attic was leaking conditioned air year-round. Our full attic insulation in Henderson scope covers air sealing, insulation removal if needed, and blown-in or spray foam installation, with a before-and-after blower-door reading on applicable jobs. The attic insulation page walks through the process and prices in detail.
Do you handle crawl space encapsulation and vapor barrier?
Yes. Crawl space encapsulation and vapor barrier installation is a full line item for us – we seal the vents, install a heavy-duty liner across the grade, and run a vapor barrier up the foundation walls, then document the sealed condition with photos. Henderson sits in a climate where the vapor drive from grade into the home is real in the winter and the dry heat pulls moisture out of exposed soil in the summer; both work against you if the crawl space is open. If your crawl space has a failed 6-mil liner or a liner that was never installed, we’ll show you what we’d seal and why. Call (844) 320-5338 to schedule an assessment.
Do you handle spray foam insulation?
Yes. We install both open-cell and closed-cell spray foam, primarily in attics, rim joists, and exterior walls during a renovation. Spray foam is the right tool where the assembly needs to be airtight and the cavity is accessible – it seals and insulates in one pass, which is different from blowing fiberglass over an unsealed attic floor. If your home is going through a gut renovation in Henderson, spray foam on the walls is usually the faster scope than drilled-and-blown fiberglass on the same walls.
Do you handle blown-in insulation?
Yes. Blown-in fiberglass and cellulose are what we install in most Henderson attics, and they go in over a sealed attic floor – not over an unsealed one. Blown-in insulation fills around joists, wires, and ducts, and it’s the fastest way to bring a settled attic from R-19 up to R-49. We source from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so you’re not locked into one product line if a different material fits your attic better.
Do you install radiant barrier in Henderson attics?
Yes. Radiant barrier installation is a strong fit for Henderson because of the attic heat load; a foil-faced radiant barrier stapled to the underside of the roof deck can drop the attic temperature meaningfully during summer months. It’s not a substitute for attic insulation or air sealing, and we’ll tell you if it isn’t needed on your home. On most jobs we run it as an add-on to a full attic insulation scope once the attic floor is sealed and insulated, and we photograph the installed barrier as part of the Documented Photo Record.
Do you handle wall insulation?
Yes. Wall insulation in existing Henderson homes is typically blown-in fiberglass through drilled holes in the exterior siding or interior drywall, then patched and painted. That scope is a longer day than the attic, but on 1990s and early-2000s homes in Green Valley and Seven Hills we regularly find exterior walls with no insulation at all, which shows up on the energy audit as a cold interior wall surface in winter. If you’d like a whole-home energy audit before committing to wall work, that’s the most efficient place to start – we’ll show you where the envelope is leaking before we quote the fix.
How We Work: Sealed First, Then Insulated
Air sealing comes before insulation on every job we run. This is the single most-common correction we make in Henderson homes, and it’s why our process has a numbered step where most contractors don’t.
- Written price, written scope, written warranty. Before any work starts, you get all three in writing. That’s the first thing we deliver, and no tool gets lifted until you have it.
- On-site assessment with a blower-door reading. We measure the home’s current envelope leakage in CFM50 so we have a baseline to compare against after the work.
- Air sealing of the attic floor. Top plates, can lights, plumbing and electrical penetrations, and the attic access hatch get sealed. This step happens first, always – we never blow insulation over an unsealed attic floor.
- Insulation installation. Blown-in, spray foam, or a combination depending on the scope, installed to the R-value on the written scope.
- Second blower-door reading. On applicable jobs, we re-test and record the post-work CFM50 reading alongside the pre-work reading so you can see the change.
- Documented Photo Record. We photograph the sealed penetrations, the installed insulation depth, and the before and after of the attic floor. You receive it at the end of the visit.
This is the process that produces the 9,000+ homes we’ve sealed and insulated since 2016, every one with a written price before work started and a documented record when the crew left. It’s also why a job that starts with sealing often costs $400 – $1,200 more than a straight blow-in – the sealing is what actually stops the leak. Skipping it means paying for insulation that sits on top of a hole. If you’re comparing us to a lower quote, ask the other contractor whether the price includes attic air sealing and a post-work blower-door reading. If they can’t answer both, that’s the gap.
For homeowners who want to see the full picture of what happens in the attic, our home page lays out the building-envelope service line, from energy audit through vapor barrier, and the documentation that comes with each.
What’s included in the Documented Photo Record?
The Documented Photo Record includes photos of the attic floor before work, the sealed top plates and penetrations, the installed insulation depth, the attic access hatch after sealing, the finished attic floor, and – on applicable jobs – the blower-door readout screen from before and after. It’s included on every visit, not available on request. The record is your evidence that the work described on the written scope was actually done, in the order the scope said, at the R-value specified. Keep it in your home file; it also informs any future insulation or envelope work since the next contractor can see exactly what was installed.
Why is air sealing before insulation so important?
Air sealing comes first because insulation slows heat transfer but does nothing to stop air movement – an unsealed attic floor acts like a chimney, pulling conditioned air up through the ceiling all year. Blowing insulation on top of that hole means the insulation still has a chimney underneath it. We never do this, because in practice we’ve measured it: a home in Henderson can lose 30% or more of its heating and cooling through attic air leaks, and no R-value will fix that. Sealing the leaks first gives the insulation something to actually insulate.
Who performs the work?
Independent local insulation professionals perform the work under the Haven Standard, and every technician on site is background-checked and arrives with a named tech and a text when they’re on the way. Envelope Insulation Co. connects homeowners with these professionals – we don’t run our own trucks or crews – but the written price, the scope, the warranty, and the Documented Photo Record are all delivered under our Haven Standard, and the 365-Day Done Right Promise applies to every completed job. Our technicians have up to 10 years of experience. If a job isn’t done right within 365 days, we make it right.
Still Have a Question?

If your question isn’t on this page, the fastest way to get an answer is to call. A live person picks up, and most of what we cover in a first call is scope and price – not a sales pitch. Bring us a written estimate from another contractor and we’ll read it with you, free, line by line. Call (844) 320-5338 for a free estimate on any insulation, air sealing, crawl space, or radiant barrier job in Henderson, and we’ll put the price in writing before anyone lifts a tool.
Have a question we didn’t cover? Call Envelope Insulation Henderson at (844) 320-5338.