CertainTeed Home Energy Audit in Henderson: What to Know First
We conduct an independent CertainTeed home energy audit in Henderson that starts with a blower-door test – a pressurization reading showing in one number how much conditioned air your building envelope is losing – and usually finishes the same day, with readings, thermal photos, and a written price in your hands. We’re not affiliated with CertainTeed; we’re an independent CertainTeed service provider, so our job is to measure your home’s actual performance and show you what the numbers were before and after. Most audits run $275 to $550 depending on square footage and whether duct leakage testing is included. Every job begins with a written price and closes with a Documented Photo Record. Call (844) 320-5338 and a live person answers, day or night.

This page is for Henderson homeowners whose homes were insulated with CertainTeed products and who want to know whether the envelope is performing the way it was supposed to.
How CertainTeed Products Fail – and How We Fix Them
CertainTeed makes strong products. What goes wrong in Henderson homes usually isn’t the product itself. It’s the installation around it, or the way a specific line interacts with our climate and this valley’s construction habits. Here’s what we actually find on CertainTeed audits in Henderson.
- CertainTeed Sustainable Insulation fiber glass batts compressed at the eaves. In Henderson’s low-slope and shallow attic returns, installers routinely stuff batts into spaces narrower than the batt’s rated thickness. Compressed fiber glass loses R-value in proportion to how much it’s squeezed. We measure the actual settled depth at each corner, not the label, and we blow loose fill to the correct R-value rather than leaving a compressed batt in place.
- CertainTeed InsulSafe SP loose fill settling unevenly over air leaks. InsulSafe is a good loose-fill fiber glass product, but we regularly find it blown over unsealed top plates, can lights, and plumbing penetrations during a Henderson energy audit. Warm air funnels through those gaps and the surrounding fill gets dust-loaded and less effective. We pull the affected fill aside, air seal, then reinstall. Insulation goes over sealed surfaces, never over open leaks.
- CertainTeed batts over can lights with no clearance detail. Older recessed fixtures in Henderson homes generate heat, and batts pushed directly against a non-IC-rated housing are both a fire concern and a thermal bypass. We map every can light, check the housing rating, and either add a sealed cover or maintain proper clearance before any insulation goes back.
- CertainTeed duct wrap and duct board with failing seams. In Henderson’s attic heat – attic air routinely climbs past 140°F in July and August – CertainTeed duct wrap seams and duct-board joints can delaminate and the tape pulls free. That’s duct leakage showing up as a high blower-door reading even when the ceiling insulation looks fine. We run a duct leakage test before recommending anything, so we’re not guessing about where the loss is.
- CertainTeed wall batts behind older Henderson cavity walls losing contact. Friction-fit wall batts can sag or lose contact with the sheathing, creating a convective loop inside the wall cavity. This shows up as cold interior walls in winter and as a blower-door number that’s higher than the attic insulation would suggest. We use thermal imaging to confirm the gap before we recommend any wall work.
Our CertainTeed Home Energy Audit Process

Here’s what a CertainTeed audit looks like from the first call to the moment we leave.
- 1
Call and scheduling. A live person answers any time. We confirm your square footage, attic access, and what CertainTeed products are already in place, and we set a window. You get a text when the technician is on the way.
- 2
On-site diagnostics. We run the blower-door test and take a baseline CFM50 reading. Thermal imaging walks the ceiling plane, walls, and rim joist. We do a visual insulation inspection and, where duct leakage is suspected, a duct leakage test.
- 3
Findings and documentation. We show you what the readings say, name the specific CertainTeed products we found and where, and photograph every location. The Documented Photo Record is part of every visit.
- 4
Written price and scope. Before anyone lifts a tool, you get a flat written price, a written scope, and a written warranty. Also a Free Second Opinion on any competing estimate you bring us – we’ll read it with you.
- 5
Repair and re-test. Air sealing, insulation removal or replacement, duct seam work, or wall insulation correction as the scope calls for. Then a second blower-door reading. On applicable jobs, both readings go in writing so you can see the before-and-after figure.
- 6
Close-out and warranty. Final photo record delivered, 365-Day Done Right Promise applies to all completed work. If it’s not done right, we make it right.
What CertainTeed Home Energy Audit Costs in Henderson
Here are real line-item ranges for Henderson homes. These reflect what we actually bill, not a teaser number.
- Blower-door test (single reading, diagnostic): $275 – $375
- Full audit with blower-door, thermal imaging, and insulation inspection: $375 – $550
- Duct leakage test (added to an audit): $175 – $300
- Attic air sealing (top plates, can lights, penetrations): $650 – $1,400 for typical single-story attic
- Insulation removal and replacement, compressed or contaminated fill: $1,200 – $2,800 depending on square footage
- Duct seam and wrap repair: $350 – $900
What moves the price: attic size, access difficulty, how many penetrations need sealing, and whether the ducts are inside or outside the thermal boundary. Homes in Henderson built in tighter lot configurations often have shallow attic returns that make the work slower. The estimate is free, and the price is in writing before any work starts.
Why Henderson Homeowners Call Envelope Insulation Henderson for CertainTeed Work

Air sealing is a hard prerequisite on our CertainTeed jobs, not an upsell. We won’t blow insulation over an unsealed attic floor. Our technicians have up to 10 years of experience, arrive background-checked, and know the certain failure modes of CertainTeed Sustainable Insulation, InsulSafe SP, and CertainTeed duct products. We source materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber – plus Reflectix radiant barriers – so if a competitor’s quote calls for a different material, we can source it. No proprietary product lock-in.
The 365-Day Done Right Promise covers all completed work. Calls answered by a live person 24/7. Written Price Before Any Work Starts, always. And a Documented Photo Record on every visit. Over 9,000 homes sealed and insulated since 2016, every one with a written price and a documented record.
FAQs
No. A home energy audit is a diagnostic service, and CertainTeed product warranties cover material defects, not the condition of your building envelope. If the audit finds that a CertainTeed product was installed incorrectly or has failed because of an unsealed penetration, the material replacement is a separate question from the air-sealing work. Call (844) 320-5338 and we’ll review your warranty situation before any work is scoped.
Most audits are scheduled within a few business days, and the audit itself typically finishes the same day. Calls are answered by a live person 24/7, and if you’re already dealing with a failing envelope, call (844) 320-5338 and we’ll get you the earliest available window.
It measures how much air your home is losing through its building envelope, and it names where the loss is happening. Blower-door readings in CFM50, thermal images of the ceiling plane and walls, an insulation depth and condition check, and a duct leakage test when relevant. The result is a written report with a documented photo record, and the price to fix what’s found. If you want to talk through the scoping first, call (844) 320-5338.
Usually repair, and it’s not close. Most of what we find on Henderson audits is installation-related – compressed batts, unsealed penetrations, failing duct seams – and correcting that costs far less than wholesale removal. Removal and replacement is the right call when the fill is contaminated with rodent activity or moisture, or when the wrong R-value was installed for the space. The audit tells you which case you’re in before you commit. Estimates are free; call (844) 320-5338.
We use the material that fits the scope and the homeowner’s budget, and we say which one in writing. For CertainTeed attic and wall work we can source CertainTeed materials directly through authorized distribution. Where a quality aftermarket material performs as well or better for the specific correction needed – for instance, using Icynene or Demilec spray foam to seal a stubborn penetration – we’ll present that option and explain the trade-off in the written scope. No proprietary product lock-in.
Yes, and that’s the whole point. We publish before-and-after blower-door readings on every applicable job. A single figure shows how much air was lost before sealing and how much after. You don’t have to trust a description. You can read the number. Call (844) 320-5338 to schedule.
Have a CertainTeed home energy audit on your list for your Henderson home? Call (844) 320-5338 for a free estimate. We’ll answer live, pull your addresses and products into a written scope, and get you a documented photo record and a written price before any work starts.
Written by the team at Envelope Insulation Henderson, serving Henderson and nearby areas.