Icynene Vapor Barrier Installation: The Henderson Owner’s Guide
We install Icynene-compatible vapor barrier systems in Henderson, and most of these jobs run between $1,200 and $3,800 installed, depending on square footage and how much of the existing Icynene has to come out. Same-day availability is common when the diagnosis is clear by mid-morning. Owners usually discover the failure the same way: a musty smell that shows up in the crawl space or under the first-floor flooring, a cold spot that won’t go away in January, or a utility bill that climbed through a Henderson summer without any obvious explanation.

Which Icynene Models This Applies To
Icynene vapor barriers show up most often alongside three product families: the Icynene Classic open-cell spray foam used in vented and semi-vented crawl spaces, Icynene MD-R-200 and MD-R-220 in wall and attic assemblies where a sheet vapor retarder is specified behind the foam, and Icynene ProSeal 200 in newer Henderson builds. The barrier itself is usually a 6-mil to 20-mil reinforced poly or a foil-faced sheet, and the label is where the right part lives. Look for the product name, the mil thickness, and the permeance rating printed on the roll edge or the foam drum. A 6-mil 4-perm sheet and a 20-mil 0.05-perm sheet are not interchangeable, and installing the wrong one in a Henderson crawl space is how a vapor barrier becomes a moisture trap. On OEM versus aftermarket, the honest answer is that the branded Icynene vapor barrier is a real product but rarely required. A quality aftermarket equivalent from a manufacturer like Reflectix, insulmat, or a Stego-style reinforced roll will do the job at half the price if the mil thickness and permeance rating match the spec. We source both and let homeowners choose. Envelope Insulation Henderson is an independent service provider, not affiliated with Icynene.
Signs Your Icynene Vapor Barrier Installation Is Failing

The vapor barrier under an Icynene system fails in specific, visible ways. Here is what to look for, and what each sign means:
- Visible moisture or condensation on the barrier or the floor joists. The barrier has a tear or a seam that has opened, and warm humid air is meeting the cold surface underneath. In Henderson, our summer monsoon humidity drives this fast.
- Mold, mildew, or a persistent musty odor in the crawl space. Water is sitting between the barrier and the soil instead of draining away. This usually means the barrier was laid flat rather than draped, or the perimeter was never sealed to the foundation wall.
- Sagging or puddling between the vapor barrier and the ground. The barrier has stretched or the material has degraded to the point where it no longer holds shape. Twenty-mil reinforced sheet should stay flat for 15 to 20 years; a 6-mil sheet in a Henderson crawl space with any foot traffic will fail in five.
- Peeling tape, lifted edges, or foam-to-barrier separation. The seal between the vapor barrier and the Icynene foam edge has lost adhesion, which is very common in attics where our temperature swings from 40°F nights to 115°F attic peaks. The adhesive loses its grip after a couple of summers.
- Rodent damage: gnaw marks, tunnels, or shredded material. Rodents in a Henderson crawl space will chew through unprotected poly overnight. A reinforced or foil-faced barrier with proper sealing at penetrations is what holds up.
Replacement Cost & What’s Included
In Henderson, a full replacement of a failed Icynene vapor barrier runs $1,200 to $3,800 installed. A small crawl space with a standard 6-mil poly runs roughly $1,200 to $1,800. A reinforced or foil-faced barrier with a 20-mil spec, full seam-taping, and perimeter sealing to the foundation runs $2,400 to $3,800. What drives the range is square footage, whether the existing foam and failed barrier have to be removed (removal adds $400 to $1,200), the permeance rating you’ve specified, and any sub-floor repair if rot is present. The written price covers labor, material, seam tape, mastic, and cleanup. Our 365-Day Done Right Promise applies to the work, and you walk away with a Documented Photo Record of every seam and the finished surface. We will not install a new vapor barrier over unsealed penetrations or over Icynene that has lost adhesion. Sealing comes first, then the barrier, every time.
DIY or Call Us?

An owner can safely check for tears, visible moisture, and lifted tape. A flashlight and a phone camera will tell you most of what you need to know. What we don’t recommend doing yourself is the reinstallation of a reinforced barrier over Icynene, especially in a crawl space: the work involves confined-space entry, mechanical fastening to the foundation wall, and the correct permeance rating for our climate. Install the wrong mil thickness or skip the seal at a penetration and the barrier creates a moisture problem worse than the one it replaced. The other safety consideration is what’s already in the crawl space. Rodent activity, mold, and standing water are common in Nevada crawl spaces and should be handled before any barrier goes down. If your Henderson crawl space or attic has any of the five signs above, call us at (844) 320-5338. A live person answers, and the estimate is free.

FAQs
A properly installed barrier lasts 15 to 20 years in a Henderson crawl space; a 6-mil sheet with foot traffic overhead often fails in five. UV exposure and heat cycling are what accelerate the failure. Attic-mounted barriers go sooner than crawl space ones.
Sometimes, yes. Isolated tears and lifted tape can be repaired with a compatible patch and seam tape, and we do those repairs where the barrier is otherwise sound. A barrier with widespread sagging, mold, or rodent damage gets replaced, not patched. Call (844) 320-5338 and we will tell you which one yours is.
Most Henderson vapor barrier replacements are a one-day job, two days if the crawl space requires removal of the existing Icynene and failed barrier first. You’ll know before we start. Your written price includes the schedule.
We source Icynene-compatible vapor barrier material from the same regional supply channels that stock Icynene foam, along with aftermarket equivalents from brands like Reflectix, insulmat, and reinforced poly suppliers. You’ll see the material spec, mil thickness, and permeance rating in the written scope before work starts, and a Free Second Opinion on any estimate from another Henderson contractor is part of the deal.
Written by the team at Envelope Insulation Henderson, serving Henderson and nearby areas.
Ready for a free estimate? Call Envelope Insulation Henderson at (844) 320-5338. Your written price is prepared before any work begins, and every visit closes with a Documented Photo Record.