Demilec Spray Foam Insulation in Henderson: What to Know First
We install and service Demilec spray foam insulation in Henderson as an independent Demilec service provider, and most residential jobs are completed in a single day. Pricing is quoted in writing before any work starts, and the figure you’re quoted is the figure you pay. This page is for Henderson homeowners who already have a Demilec product in the home, or who are weighing Demilec foam against another material, and want the practical detail: what these foams actually do in the Henderson climate, what tends to go wrong, and what a real job costs in dollars. Call (844) 320-5338 when you want a written number.

How Demilec Products Fail – and How We Fix Them
Demilec makes two foam families that matter in this market: Heatlok HFO (a closed-cell foam that runs roughly 2 lb per cubic foot) and the open-cell Sealection family, plus Soya-based formulations. Neither “fails” the way a mechanism fails. What fails is the installation around it, or the building it’s attached to. Here are the patterns we actually chase in Henderson attics and crawls.
- Closed-cell spray against an unsealed attic floor. Homeowners sometimes ask us to spray Heatlok HFO over the top plate and can lights without sealing first. Closed-cell foam is a vapor retarder and an air barrier in one pass, so it looks like it should solve everything. It doesn’t seal the gaps it bridges: unsealed top plates still leak, and can lights get buried under foam you can no longer access. Our fix is to air seal the penetrations first, then spray. We won’t blow or spray foam over an unsealed attic floor.
- Open-cell foam in a shallow floor cavity. Open-cell Sealection runs light, around half a pound per cubic foot, and needs a real depth of cavity to reach a useful R-value. In older Henderson homes with 2×6 or 2×8 framing, a shallow open-cell pass delivers less R-value than the homeowner expects. The answer is either a deeper closed-cell pass or a hybrid with a rigid board, and we say which one on the written scope rather than guessing at the spray rig.
- Rim joist gaps the spray can’t reach. Rim joist spray foam is a top-value job in a Henderson crawl space or basement, but if the sprayer bridges the foam over a truly open gap at the foundation sill, the thermal performance goes with the leak. We foam-and-pack the rim properly, or we foam against a sealed air barrier, and we document the reading with a blower-door test before and after.
- Garage ceiling foam over a hot Arizona-side garage. Spraying a garage ceiling with Demilec foam is common in Henderson for livable space above the garage, but a sprayer working fast on a July afternoon can lay down thin foam that reads blistering later. Our crew meters the foam to the specified thickness and checks the pass with a gauge, and we tell you what thickness we sprayed on the trip record.
- Roof deck foam without a venting or moisture plan. Spray foam on a roof deck has to know where the moisture goes. In Henderson’s dry heat, a poorly detailed spray foam install on the underside of the roof sheathing can lock moisture into the sheathing during the cool season. We put the assembly plan in the written scope, either a hot-roof or vented detail, and never leave the homeowner to discover it in the inspection.
Our Demilec Spray Foam Insulation Process

- 1
Call or text in, and we answer. A live person picks up around the clock. We ask what you have, where it’s aimed (attic floor, rim joist, garage ceiling, roof deck), and what problem you’re trying to solve.
- 2
Diagnostics first. On applicable jobs we run a blower-door test, a pressurization reading that shows in a single number how much air your envelope is losing. That figure becomes your baseline.
- 3
Written price and scope. Before anyone lifts a tool, you get the flat price, the written scope, the written warranty, and the product line and thickness spec. Haven Standard Clause 1, every job.
- 4
Seal first, then spray. We air seal top plates, can lights, and penetrations before any foam goes in. Then the Demilec foam goes down at the specified thickness.
- 5
Verify and photograph. We run the blower-door test again if the job applies, then photograph the sealed, sprayed work and include the photo record in your file.
- 6
365-Day Done Right Promise. If something isn’t right, we come back and make it right. The warranty was in writing before day one, so there’s no argument about what was covered.
What Demilec Spray Foam Insulation Costs in Henderson
These are the ranges Henderson homeowners actually see, not a national average. Expect the number to move with cavity depth, the amount of air sealing required first, and access (a crawl space rim joist costs less to spray than a full attic floor). Demilec open-cell and closed-cell sit at different price points because they use different chemistry and different thicknesses to reach the same R-value.
- Attic floor, open-cell Demilec (Sealection family), 1,500 sq ft home: $2,200 – $4,500
- Attic floor, closed-cell (Heliok HFO or similar), same home: $3,800 – $7,200
- Rim joist spray foam, typical Henderson crawl space: $700 – $1,900
- Garage ceiling spray foam: $1,400 – $3,200
- Roof deck (underside sheathing), full assembly: $4,500 – $9,000+
Air sealing is priced in the same written scope, not bolted on afterward. Bring a competing written estimate and we’ll read it with you line by line. Call (844) 320-5338 for a free estimate with a written price before any work starts.
Why Henderson Homeowners Call Envelope Insulation Henderson for Demilec Work

We’ve sealed and insulated 9,000+ homes since 2016, and every job closes with a written price and a documented record. On Demilec work specifically, our technicians have up to 10 years of experience, and they know what Heatlok and the Sealection family look like when they’re sprayed right and when they aren’t. The 365-Day Done Right Promise is written, not spoken, on every job. We’re independently owned and operated, not a franchise, and we source from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, plus Reflectix for radiant barrier work. Demilec is never the only tool on our truck; if a different material serves the assembly better, we’ll say so on the written scope.

FAQs
Does using a Demilec product void my warranty? No: using a Demilec spray foam product does not void a homeowner’s warranty when the install follows the manufacturer’s published assembly details, and our written scope names those details up front. If a competing quote leaves the assembly detail out, ask us to read it with you. Call (844) 320-5338.
Can you get Demilec parts and products for a repair in Henderson? Yes: Demilec product lines are stocked by regional suppliers serving Henderson, and our crews source them per job, so a repair or top-up is rarely a wait on a specialty order. We confirm the product line and lead time on the written scope, not on a phone promise.
Is it cheaper to repair existing Demilec foam or replace it? Repair is almost always cheaper when the existing foam is still bonded and the problem is a gap or a thin pass; full removal is the only option when the foam has separated from the sheathing or locked water into the assembly. We diagnose first with a blower-door reading, then put the repair price and the replace price in the same written estimate so you can compare them side by side.
How fast can you get a Demilec job done in Henderson? Most residential Demilec spray foam jobs in Henderson are completed in one day, diagnostics and cleanup included, and the before-and-after blower-door readings go in your file the same day. Call (844) 320-5338 and we’ll give you the earliest opening for a written estimate.
Do you publish the before-and-after blower-door numbers? Yes, on applicable jobs: every applicable job includes before-and-after blower-door numbers in the record, so you can see the CFM50 drop the job produced. If a job doesn’t call for a blower-door test, we say so in the written scope rather than leave the gap unexplained.
Written by the team at Envelope Insulation Henderson, serving Henderson and nearby areas.