Fast, Reliable Attic Air Sealing Across Enterprise
If you own a home in Enterprise, NV, there’s a good chance your attic was framed by a production builder sometime between 1995 and 2020, and there’s an even better chance those builders left batt insulation compressed or pulled back around the HVAC platform, recessed cans, and plumbing chases. That’s where your summer cooling dollars leak out. We seal those gaps first, then insulate, and we publish the before-and-after blower-door numbers so you can see what changed. We answer calls 24/7 at (844) 320-5338 and get to Enterprise fast.
Why Envelope Insulation Henderson Is Enterprise’s Preferred Attic Air Sealing Company
We’ve built a real following in Enterprise by doing something simple: we don’t blow insulation over an unsealed attic floor. Ever. Under The Haven Standard, every job starts with a written price and ends with a documented photo record, and on air-sealing work we publish before-and-after blower-door readings – a pressurization measurement that shows, in one number, how much conditioned air your home was losing. Homeowners along the 89139 ZIP corridor tell us the readings are what sold them. We’ve sealed and insulated more than 9,000 homes since 2016, and every one closed with that same documentation. Our technicians bring up to 10 years of experience, and calls are answered by a live person, not voicemail. When you call about an Enterprise attic, we can usually get a technician out within a couple of days.
Our Attic Air Sealing Services in Enterprise

Attic Floor Air Sealing
Most Enterprise tract attics have batts mashed down or shoved aside at the HVAC platform, leaving an R-value gap right where summer heat gain peaks. Our Attic Air Sealing crew seals the entire attic floor plane, then insulates evenly over the top so the R-value is consistent from rim to rim. A typical attic floor air sealing job in Enterprise runs $1,200 – $2,400 depending on square footage and how much batt repositioning is needed.
Top Plate & Penetration Sealing
Every wall in your house terminates at a top plate, and in builder-grade Enterprise construction those plates and the plumbing, electrical, and gas penetrations running through them are almost never sealed. We foam each one. A typical top plate and penetration sealing job in Enterprise runs $450 – $900, and it’s usually bundled with attic floor sealing for a combined price.
Can Light & Duct Boot Sealing
Recessed can lights and duct boots that aren’t sealed act like chimneys, pulling 150°F+ attic air and dust down into your living space. In Enterprise’s two-story plans with large attic volumes, that heat migration is the biggest single driver of second-floor cooling complaints. Can light and duct boot sealing in Enterprise typically runs $350 – $750.
Attic Hatch Sealing
That pull-down stair or scuttle hatch in your closet is often the worst air leak in the whole envelope. A loose, uninsulated hatch undermines everything else you’ve sealed. We weatherstrip and insulate the hatch and confirm it closes tight. Attic hatch sealing in Enterprise runs $250 – $450 as a standalone, or it’s included when you bundle with the attic floor.
Trusted Brands We Service in Enterprise
We source insulation from Johns Manville, Knauf, CertainTeed, Rockwool and other major manufacturers, with no proprietary product lock-in. That matters because it means we specify the right material for your attic, not the one a distributor is pushing. Because the materials are widely stocked, turnaround is quick: most Enterprise jobs are scheduled within days of the written estimate. We don’t warehouse parts or maintain local stock; our independent local pros pull what the job needs when the job is confirmed. Written scope lists the exact product and thickness before anyone lifts a tool.
Common Attic Air Sealing Problems We See in Enterprise Homes

- Compressed batts at the HVAC platform. Builder crews routinely mashed the original R-13 to R-19 batts down or shoved them aside to run ductwork. That leaves an R-value gap at the exact spot your two-story plan pulls heat through in July.
- Unsealed recessed can lights. In production tract homes, cans are punched through the ceiling plane with no gasket. When it’s 150°F+ up there, that becomes a direct path for hot attic air and dust into bedrooms and hallways.
- Open plumbing and electrical chases. Chases between floors often read as open holes in a blower-door test – a set of unsealed penetrations that leak continuously, not just at the wall plates.
- Loose or uninsulated attic hatch. Pull-down stairs in hallways or closets typically lack weatherstripping and insulation, and a single hatch can leak as much air as a small window left open year-round.
Pricing for Attic Air Sealing in Enterprise, NV
Enterprise’s production-builder attics are generally quick to identify and seal, so most jobs land in these ranges:
- Attic floor air sealing: $1,200 – $2,400
- Top plate & penetration sealing: $450 – $900
- Can light & duct boot sealing: $350 – $750
- Attic hatch sealing: $250 – $450
- Combined air sealing + blown-in upgrade (typical Enterprise home): $2,400 – $4,800
What moves the number is attic square footage, ceiling penetrations, and how much batt repositioning is needed before anything can be sealed. We write a flat price and scope before any work starts, no exceptions – and if you have a competing written estimate, we’ll read it with you for free. Call (844) 320-5338 for a written price on your Enterprise home.
We Also Serve Cities Near Enterprise

Enterprise is one of several south-valley communities we serve. If you’re just outside the 89139 boundary, you’ll find the same written-scope, blower-door-documented process in Attic Air Sealing in Enterprise-adjacent Spring Valley, Paradise, Winchester and Henderson. Same team, same standard, same documentation. Call (844) 320-5338 to confirm coverage on your address.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Attic Air Sealing in Enterprise

Because sealing prevents the insulation from being wasted over gaps. In a 2005-era Enterprise tract attic, the production crew almost always left batts compressed around HVAC platforms and chases, so adding more insulation on top just buries openings that keep leaking. Sealing the top plates, cans and boots first is the only way to guarantee the new R-value actually performs. A blower-door test before and after tells you exactly what changed. Call (844) 320-5338 to schedule one.
Yes. Sealing can lights and duct boots stops hot attic air (150°F+ in summer) and dust from draining into your living space, and most Enterprise homeowners see a measurable drop. The exact figure depends on how leaky the attic was to start, which is why we publish the blower-door readings before and after. Call (844) 320-5338 for a written scope and quote.
Johns Manville, Knauf, CertainTeed and Rockwool are the brands most commonly specified for Enterprise blown-in upgrades, with no proprietary lock-in. The right choice depends on your attic’s depth, framing and HVAC layout. Our written scope names the exact product and thickness before work begins. Call (844) 320-5338 and we’ll bring samples and the spec sheet.
It’s one of the best windows to do it, because you still have documentation to compare against the builder’s scope. Air sealing is an envelope improvement, not a repair, so it doesn’t void most warranties – but we’ll review your builder paperwork with you under our free second-opinion offer. The blower-door reading gives you a clean before-after for your records. Call (844) 320-5338 for a written price.
Enterprise attics are mostly 1995 – 2020 production-builder jobs, so sealing means correcting shortcuts: compressed batts at HVAC platforms, unsealed cans and chases, and a loose hatch. Older hand-built Las Vegas homes often need full insulation replacement and knob-and-tube era work instead. Different starting point, different scope. Our written estimate reflects which category your Enterprise home falls into. Call (844) 320-5338 and we’ll confirm.
Written by the team at Envelope Insulation Co.