A Topside company - serving Henderson, NV

Icynene Attic Cleaning & Rodent Proofing in Henderson, NV

Icynene Attic Cleaning & Rodent Proofing in Henderson: What to Know First

We provide independent Icynene attic cleaning and rodent proofing in Henderson, and most jobs run one to two days from assessment to final photo record. We’re an independent Icynene service provider, not affiliated with or authorized by the manufacturer, and we quote a flat written price before any work starts. Expect attic cleanouts, sanitizing, exclusion work, and Icynene restoration to land between $1,400 and $6,800 depending on contamination depth and how much foam has to be removed and replaced.

Technician installing rodent proofing mesh over an attic gable vent in Henderson, NV

Call (844) 320-5338

This page is for Henderson homeowners who already have Icynene in the attic – open-cell, closed-cell, or the older Icynene Classic and MD-R lines – and who now have rodents, soiled insulation, or foam that’s been tunneled through. Call (844) 320-5338 and a live person answers, day or night.

How Icynene Products Fail – and How We Fix Them

Icynene foam is a fine product installed correctly. The failures we see in Henderson attics almost always trace back to how it was applied, what it was applied over, or what moved into it afterward. Here’s what we actually find.

  • Icynene Classic and MD-R open-cell foam gets tunneled by roof rats. These older open-cell formulas cure soft, around 0.5 lb density, and rats work through them the way they’d work through a foam mattress. We see this constantly in Green Valley and Anthem attics where the foam was sprayed directly on the roof deck. The fix is exclusion first – seal every entry point – then remove the compromised foam bays and re-spray with closed-cell at the deck line so the material has real structural resistance.
  • Closed-cell Icynene sprayed over an unsealed top plate hides air leaks that pull in rodent scent and moisture. When foam goes down before the top plates, can lights, and wire penetrations are sealed, conditioned air keeps leaking at the plate line and the foam masks it. We don’t blow or spray over an unsealed floor. We air-seal the penetrations first, then restore the foam in the same pass so the assembly is continuous.
  • Icynene on older attic floors traps rodent droppings and urine in the foam’s cell structure. Unlike fiberglass, which you can vacuum and pull, cured foam holds odor in the open cells. Hantavirus and salmonella risk lives in the dust, so this is not a shop-vac job. We do contained removal with HEPA filtration and full PPE, then sanitize the decking and framing before any new material goes in.
  • Older Icynene Classic attics in Henderson’s 1998 – 2008 build stock show foam shrinkage at the perimeter. The foam pulls back a quarter to a half inch from rafters and wall plates as it ages, and those gaps are rodent highways. You’ll see rub marks and grease trails along the shrink line. We fill and re-seal those gaps and then run exclusion mesh along the whole perimeter.
  • Solar panel and HVAC retrofit penetrations through Icynene are the most common entry point we find. When a panel install or a mini-split line set punches through foam, the hole never gets re-sealed to the foam’s original spec. We back-fill every penetration with closed-cell foam and rigid blocking so the repair matches the surrounding assembly.

Our Icynene Attic Cleaning & Rodent Proofing Process

Technician installing blown-in attic insulation with a professional hose
Our Icynene Attic Cleaning & Rodent Proofing Process
  1. 1
    Assessment and documented photo record. We photograph the attic before we touch anything – entry points, droppings, foam condition, moisture readings – so you have a before record of what we found.
  2. 2
    Containment and HEPA removal. Contaminated Icynene and debris come out under negative pressure with HEPA filtration. We bag and haul everything; no bagging out in your driveway.
  3. 3
    Sanitize and deodorize. We treat the decking, framing, and remaining foam with a sanitizer rated for rodent-contaminated spaces, then verify with a moisture meter and a visual pass.
  4. 4
    Exclusion and proofing. Every gap, soffit vent, gable, and penetration gets sealed with the right material – galvanized mesh and hardware cloth for larger openings, copper mesh for weep holes, closed-cell foam for irregular gaps.
  5. 5
    Air seal, then restore Icynene. Top plates, can lights, and penetrations get sealed before any new foam goes down. Then we re-spray the removed bays to match the original assembly. We use Icynene and Demilec products when the existing foam is Icynene, and we’ll tell you when a compatible closed-cell from another line is the better match for the repair.
  6. 6
    Final photo record and 365-Day Done Right Promise. You get the full photo set and a written warranty before we leave. If something’s not right in the first year, we make it right.

What Icynene Attic Cleaning & Rodent Proofing Costs in Henderson

Most Icynene attic jobs in Henderson fall into one of these scenarios. Here’s what they actually run:

Scenario Typical Price Range
Attic cleanout – contaminated foam and debris removal, HEPA containment $1,400 – $2,900
Attic sanitizing and decontamination – decking, framing, foam surface $600 – $1,400
Rodent proofing and exclusion – full perimeter, soffits, penetrations $900 – $2,200
Icynene restoration – re-spray removed bays, air seal, closed-cell repair $1,800 – $4,800
Full package – cleanout, sanitize, proof, restore $3,200 – $6,800

What moves the price: attic square footage, how deep the contamination runs, how many entry points we find, whether the existing foam is open-cell or closed-cell, and whether you need the whole floor removed or just certain bays. Access matters too – low-pitch attics in Seven Hills and MacDonald Ranch homes run higher because of the containment setup. We give you a free second opinion on any written estimate, so if you’ve got a quote in hand, bring it and we’ll read it with you. Flat written price before any work starts, always.

Why Henderson Homeowners Call Envelope Insulation Henderson for Icynene Work

Professional contractor installing fiberglass batt insulation in a residential attic
Why Henderson Homeowners Call Envelope Insulation Henderson for Icynene Work

Our technicians have up to 10 years of experience with spray foam, including Icynene open-cell and closed-cell assemblies. They’re background-checked, and they show up when we said they would, with a text when they’re on the way. Under the Haven Standard, it’s all in writing: flat price, written scope, written warranty before anyone lifts a tool. Every job closes with a Documented Photo Record, and on applicable jobs we provide before-and-after blower-door readings – a pressurization test that shows, in one figure, how much air your building envelope was losing before and after the work.

Technician installing rodent proofing mesh over an attic gable vent in Henderson, NV

We work with Icynene and Demilec, and we also service Reflectix radiant barrier and other products in the same attics, so you’re not calling three contractors to fix one problem. No proprietary product lock-in – if a compatible repair makes more sense than a full Icynene re-spray, we’ll tell you. Backed by the 365-Day Done Right Promise and a live person answering (844) 320-5338 around the clock.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Insulation help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 320-5338
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Envelope Insulation Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch