A Topside company - serving Henderson, NV

Icynene Insulation Removal & Replacement in Henderson, NV

Icynene Insulation Removal & Replacement in Henderson: What to Know First

We provide independent Icynene insulation removal and replacement in Henderson, and most single-attic jobs run one to two days from removal to final blower-door reading. Our honest posture on price: you get a written price before any work starts, and in most Henderson attics that lands between $2,400 and $6,800 depending on square footage, how much foam has to come out, and whether the decking is sound underneath. This page is for Henderson homeowners who bought between 2015 and 2025, have Icynene in the attic or walls, and want to know whether it’s failing, what removal actually involves, and what it costs before they pick up the phone. Call (844) 320-5338 and a live person answers, day or night.

Technician performing professional attic insulation removal and replacement service in Henderson, NV

Call (844) 320-5338

Key Takeaways

  • We’re an independent Icynene service provider – not affiliated with or authorized by the manufacturer.
  • Icynene spray foam and the older Icynene Classic formulas fail in ways specific to how they were installed, not in generic ways.
  • Removal is usually a one-to-two-day job in a standard Henderson attic, plus a blower-door test before and after.
  • Every job starts with a written price and ends with a Documented Photo Record.

How Icynene Products Fail – and How We Fix It

Icynene is a brand family that spans open-cell and closed-cell spray foams, from the older Icynene Classic and LD-R-50 open-cell lines to newer closed-cell products. In Henderson attics we mostly see the open-cell formulas, and each one fails in its own way once summer takes hold. Here’s what we actually find, and what we do about it.

  • Open-cell Icynene that soaked up attic humidity. Henderson’s dry climate hides this well, but monsoon season drives attic RH up enough that open-cell foam acts like a sponge. The foam stays damp underneath, decks start to discolor, and you smell that musty attic smell even though nothing looks wet from above. Our fix: full removal of the affected field, not spot patching – water migrates through open-cell foam in unpredictable paths. We dry the decking before anything new goes down.
  • Icynene sprayed over an unsealed attic floor. This is the failure that produces most of our Henderson removal calls. If the original installer foamed the ceiling plane without air sealing the top plates, can lights, and plumbing penetrations first, you get foam that’s doing half a job – it insulates but the attic still exchanges air with the living space through every gap underneath. Our fix: we remove the foam in the problem zones, air seal the penetrations properly, then re-insulate. It’s the order that matters, and it’s the whole reason we seal first, then insulate.
  • Thin or uneven Icynene coverage from the original job. Older open-cell installs frequently came in well short of the R-value marked on the paperwork – we routinely find ceilings with R-13 to R-19 where the spec called for R-38 or better. Henderson summers punish that gap, and your energy bill shows it. Our fix: removal of the thin zones and a full re-insulation to the correct depth with new material, documented against the target R-value.
  • Foam that pulled away from the roof deck. Closed-cell Icynene applied directly to the underside of roof sheathing can delaminate at the bond line after years of thermal cycling – attic temperatures here swing hard from a 110°F afternoon to a cool night. Once a section separates, it becomes a condensation point. Our fix: remove the delaminated runs, inspect the decking for moisture damage and rot, and replace the field.
  • Icynene over vermiculite or old fiberglass. We get calls where foam was sprayed on top of older vermiculite insulation or loose fiberglass instead of being removed first. That’s a problem for two reasons – trapped moisture and, with vermiculite, the potential for asbestos-containing material that has to come out under proper containment. Our fix: full removal of both layers, vermiculite handled per Nevada requirements, before we replace anything.

None of these failures are visible from the ladder hatch. Every one of them requires getting into the attic with a moisture meter and a flashlight and looking at what’s actually under the foam.

Our Icynene Insulation Removal & Replacement Process

Technician installing blown-in attic insulation with a professional hose
Our Icynene Insulation Removal & Replacement Process

Every Icynene job in Henderson follows the same sequence. Under Haven Standard: Have it in writing, nothing starts without a written price, written scope, and written warranty in your hands.

  1. 1
    Attic inspection and moisture reading. We open the hatch, measure the existing Icynene depth and R-value, run a moisture meter on the decking, and check for vermiculite or old material underneath. You get a written assessment with photos.
  2. 2
    Blower-door test before we touch anything. A blower-door test – a pressurization reading that shows, in one number, how much air your building envelope is losing – gives us the baseline. Most Henderson attics in this situation read somewhere between 2,500 and 5,500 CFM50 depending on size and leakage.
  3. 3
    Removal. We containment-off the attic, HEPA-vac the foam out, and bag it. Vermiculite and suspect materials go through the proper channels. The whole attic comes clean, not spot-cleaned.
  4. 4
    Air sealing, then replacement. Top plates, can lights, plumbing and electrical penetrations get sealed before any new insulation goes down. We use Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, or GreenFiber material – whichever your scope specifies, no proprietary lock-in.
  5. 5
    Blower-door test after, and the written record. We run the test again and give you both numbers so you can see the leak reduction in one figure. You walk away with the before-and-after readings, the Documented Photo Record from the visit, and the 365-Day Done Right Promise in writing.

Typical Henderson attic turnaround is one to two days for removal and replacement, plus the two blower-door tests.

What Icynene Insulation Removal & Replacement Costs in Henderson

Here are real ranges based on what we see across Henderson attics. The written price is what you actually pay – these are the numbers most homeowners land inside once we’ve inspected.

Scenario Typical price range
Icynene removal + replacement, standard attic (1,200-1,800 sq ft) $3,200 – $5,400
Full-foam removal, larger attic (2,000-2,600 sq ft) $4,800 – $6,800
Icynene over vermiculite removal (special handling) $4,500 – $8,200
Partial removal + air sealing + re-insulation (problem zones only) $2,400 – $3,800
Blower-door tests (before + after) included in above Included

What moves the price: total square footage, whether the foam is open-cell (easier) or closed-cell (slower), whether vermiculite or old material is underneath, whether decking repair is needed, and attic access. Every quoted price includes the air sealing and both blower-door readings – we don’t sell those as add-ons. Bring us any written estimate and we’ll read it with you as a free second opinion. Call (844) 320-5338 for your written price.

Technician performing professional attic insulation removal and replacement service in Henderson, NV

Why Henderson Homeowners Call Envelope Insulation Henderson for Icynene Work

Professional contractor installing fiberglass batt insulation in a residential attic
Why Henderson Homeowners Call Envelope Insulation Henderson for Icynene Work

We’re an independent Icynene service provider – not affiliated with or authorized by the manufacturer – which means we have no incentive to defend a failed install. If your Icynene needs to come out, we say so and show you why. Our technicians have up to 10 years of experience, they’re background-checked and uniformed, and calls get answered by a live person 24/7 with no voicemail loops. Every visit closes with a Documented Photo Record, and every completed job is covered by the 365-Day Done Right Promise. We also service Reflectix radiant barrier if your Henderson attic has it alongside Icynene, so you’re not juggling two contractors. We’ve sealed and insulated more than 9,000 homes since 2016, and every one had a written price before work started. That’s the record we point to – not how long we’ve been doing this, but what the file looks like on every job.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Does removing Icynene void the manufacturer warranty? Yes, in some cases – the manufacturer’s warranty on the foam typically requires an authorized installer to do the removal, and DIY or unauthorized removal voids it. That’s why we tell Henderson homeowners to pull the original install paperwork before we start, and we’ll review the warranty terms with you during the free second opinion so you know what you’re giving up. Call (844) 320-5338 if you’re not sure what your warranty covers.

How fast can you get the Icynene out of my Henderson attic? Most standard Henderson attics come out in one day, with replacement the following day. Homes with vermiculite underneath or heavy closed-cell foam take two to three days. Call (844) 320-5338 and we’ll give you a firm window when we write the price.

Is it cheaper to repair the Icynene or replace it? Usually replace, once foam has failed in more than a small area. Spot-patching open-cell foam that’s already absorbed moisture doesn’t fix the moisture problem – it just hides it. If we find less than about 15% of the attic affected, we’ll quote a repair and tell you honestly. Most Henderson full-attic jobs land in replacement territory, and the $3,200-$6,800 range above shows what that costs. Call (844) 320-5338 for a written price either way.

Do you service other brands alongside Icynene? Yes – we also work on Reflectix radiant barrier and removal of older fiberglass and vermiculite in the same attic. If your Henderson home has a mix of materials, we scope it as one job with one written price. Call (844) 320-5338 to walk through what’s there.

What does the before-and-after blower-door reading actually tell me? It shows how much air your home was losing before and after the work, in a single measurable figure – a real performance number, not a claim. Every applicable Icynene job in Henderson gets both readings in writing. Call (844) 320-5338 for your free estimate and we’ll show you what a baseline test looks like on your home.

Get Your Written Price Before Any Icynene Work Starts

Worker cutting pink fiberglass attic insulation with a utility knife
Get Your Written Price Before Any Icynene Work Starts

If you’ve read this far, you’ve probably got a nagging suspicion about the foam in your attic. Call (844) 320-5338 for a free estimate, and we’ll come out, get into the attic, take moisture readings, and hand you a written price with a written scope and written warranty – before anyone lifts a tool. Bring us any competing Icynene removal quote for a free second opinion. We’ll read it with you, line by line, and tell you what it actually covers. That’s Haven Standard Clause 1: have it in writing, always.

Written by the team at Envelope Insulation Henderson, serving Henderson and nearby areas.

Need Insulation help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 320-5338
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Envelope Insulation Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch