Why Henderson Homeowners Choose Reflectix Insulation
We provide independent Reflectix insulation service in Henderson, NV. What sets our Reflectix work apart is that we treat the product as a radiant barrier system, not a sheet of foil – meaning we check the air gap, the tape seams, and the perforation pattern before we recommend anything. We are not affiliated with, authorized by, or endorsed by Reflectix, and we do not sell on the manufacturer’s behalf. What we do is assess each installation on its actual condition and tell you plainly whether it needs re-taping, re-stapling, or replacement. Call (844) 320-5338 and a live person answers.

Why Trust Envelope Insulation Henderson for Your Reflectix Insulation?
Our technicians have up to 10 years of experience, and that time includes a lot of hours in Henderson attics reading foil condition under a headlamp. Reflectix products look simple from below the ceiling line. They aren’t. The difference between a barrier that performs and one that’s just decoration comes down to things you can’t see from the hallway: whether the foil facing is still bonded to the bubble core, whether the tape seams are holding, and whether the roll was the right perforation type for the application.
We spec Reflectix materials to the job, not to whatever happens to be easiest. When we quote OEM-compatible Reflectix roll types, we name the exact construction – double reflective bubble-pack in 16-inch or 24-inch widths, white-faced foil, foam-core board, or perforated radiant barrier – because swapping one for another changes how the product behaves. Every job starts with a written price and written scope before anyone lifts a tool, and it ends with a Documented Photo Record so you can see what was done. Under our 365-Day Done Right Promise, if it’s not done right, we make it right. Warranty-safe practices are part of that: we don’t cut, fold, or compress Reflectix in ways that could void the manufacturer’s stated performance.
Common Reflectix Insulation Problems We Fix in Henderson

Henderson’s cooling season runs roughly May through September, with attic temperatures that can exceed 160°F. That heat cycling does predictable things to reflective foil products. Here’s what we find most often.
- Foil facing delaminating from the bubble core. After years of 140°F-plus attic cycling, the foil layer separates from the double reflective bubble-pack core. You get a sagging sheet with lost radiant performance – it still looks like Reflectix, but it’s no longer doing the job.
- Failed tape seams and pulled staples. The tape seams between rolls and the staple lines holding them up open up or pull loose over time. Every gap becomes a path for radiant heat to bypass the barrier entirely, which defeats the whole installation.
- Non-perforated foil installed tight over decking. This is a classic mix-up: non-perforated Reflectix laid directly against attic decking traps moisture, and that moisture can condense against the roof sheathing. Perforated rolls exist for a reason, and using the wrong one creates a moisture problem the homeowner never sees until it’s expensive.
- Reflectix laid directly over blown-in insulation. A radiant barrier needs an air gap to work. When Reflectix is pressed down onto existing blown insulation or tight against the decking, the radiant benefit is gone – and the stated product performance is compromised.
- Solar panel arrays compressing what’s underneath. Henderson roofs carry a lot of solar. Installers routinely compress or displace the Reflectix beneath the array, creating hidden hot spots you can’t spot without getting up there and looking.
A homeowner notices the attic is still baking even though Reflectix is stapled under the rafters. An infrared check often shows the foil facing has delaminated or the tape seams have opened, letting radiant heat straight through. A qualified local pro typically confirms the barrier’s air gap and facing condition, re-tapes or replaces failed sections with the correct perforated or non-perforated roll, and pairs it with proper attic ventilation so the radiant barrier actually performs in Henderson heat.
Reflectix Parts & Our Repair-vs-Replace Approach
For Reflectix, matching the correct OEM roll type matters more than aftermarket substitutes. Perforated versus non-perforated, single versus double bubble, foil-scrim versus foil-foam – these constructions behave differently under heat and moisture, so we spec the right roll for the application rather than grabbing the closest match. We source Reflectix materials per job and do not claim to keep them in local stock; what we quote is what we install, named on the written scope before work begins.
Our repair-versus-replace call is straightforward. When existing Reflectix is structurally sound – facing intact, seams re-tapeable, air gap restorable – re-taping, re-stapling, and re-establishing the gap is usually the honest and cheaper answer. Full removal is warranted only when the foil facing is degraded or the material has moisture damage. We’ll show you the photos either way so you can see what we saw. Bring us a competing Reflectix estimate and we’ll read it with you as a free second opinion. Call (844) 320-5338 for a written price before any work starts.
Our Reflectix Service Process – Step by Step

- 1
Diagnosis. We get into the attic, check foil facing condition, tape seams, staple integrity, air gaps, and perforation type. We photograph what we find.
- 2
Written price and scope. Before any work starts, you get a flat written price, written scope, and written warranty. No work begins without it.
- 3
Repair or install. We re-tape, re-staple, and restore air gaps where the existing Reflectix is sound, or install the correct Reflectix roll type where it isn’t. Attic radiant barrier, radiant barrier and ventilation, and attic insulation top-up are the three most common scopes.
- 4
Test and verify. On applicable jobs we run a blower-door test – a pressurization reading that shows in one number how much air your building envelope was losing before and after – and provide before-and-after readings so you can verify the result.
- 5
Documentation and warranty. You receive a Documented Photo Record and the written warranty, and our 365-Day Done Right Promise covers the completed work. If it’s not done right, we make it right.
Reflectix Products We Service & Install in Henderson
We work with the Reflectix constructions that make sense in Henderson’s desert heat: the Double Reflective Insulation Roll in 16-inch and 24-inch widths for standard rafter bays; the Double Reflective Foil Insulation with white polyethylene facing; the Reflective Foam Core Insulation (R-8 foil-faced foam board) where a rigid board is the right call; and the Radiant Barrier Perforated Roll for attic applications where moisture management matters. We match perforation and construction to the application, not to convenience. In a city where the insulation problem is often not the insulation but the foil that’s failed above it, getting the product right is most of the job.
We Also Service These Brands

Reflectix is one product family among many. We also work with Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber materials, so we’re not locked into any single product line when a Henderson home needs a different approach. That matters when the honest answer is spray foam or high-R blown-in rather than foil.
FAQs – Reflectix Insulation Service in Henderson
No. We are an independent Reflectix service provider and are not affiliated with, authorized by, or endorsed by Reflectix. We assess and service Reflectix installations on their actual condition and install Reflectix products as a materials choice, not as a manufacturer-authorized dealer. Call (844) 320-5338 with questions.
Yes – for Reflectix work we spec OEM-compatible Reflectix roll types because construction differences change how the product performs. Perforated versus non-perforated, single versus double bubble, foil-scrim versus foil-foam behave differently, and aftermarket substitutes often don’t match. We name the exact roll type on your written scope before work starts.
Most Reflectix re-taping and re-stapling work is a same-day attic visit; a full attic radiant barrier installation or a scope that includes attic insulation top-up typically runs longer, and we’ll give you a realistic time on the written scope. Weather and attic temperatures matter – we schedule early-morning work to beat the heat, which is standard practice in Henderson. Call (844) 320-5338 to schedule.
Usually no. Non-perforated Reflectix installed tight over attic decking traps moisture, and in Henderson that moisture can condense against the roof sheathing. Perforated rolls exist to let the assembly breathe, and for attic applications the perforated radiant barrier is typically the right choice. We confirm perforation type as part of diagnosis before recommending anything.
Because the barrier has likely failed somewhere you can’t see from the hallway – the foil facing has delaminated from the bubble core after years of 140°F-plus attic cycling, or the tape seams have opened and let radiant heat bypass the barrier. An infrared check and a look at the foil condition usually confirms it. Call (844) 320-5338 and we’ll tell you what we find, in writing.
Reflectix radiant barrier work typically runs $1.50 to $3.50 per square foot installed depending on whether it’s re-taping existing foil or a new perforated roll installation, and a full attic radiant barrier with ventilation corrections for a typical Henderson home usually lands in the $1,200 to $2,800 range. Attic insulation top-up is priced separately. You get a flat written price before any work starts – call (844) 320-5338 for yours.
No. Reflectix is a radiant barrier – it blocks radiant heat transfer and needs an air gap to work – and it does not replace attic insulation, which addresses conductive heat. In Henderson’s 100°F-plus summers the two work together, and removing insulation to rely on foil alone will leave the attic hotter than before. We’ll tell you honestly which one your home actually needs. Call (844) 320-5338 for a free second opinion on any written estimate.
Book Your Reflectix Service in Henderson, NV

If your Reflectix isn’t performing the way it should, we’ll get into the attic, check the foil facing, seams, air gap, and perforation type, and put the findings in writing with a flat price before any work starts. Call (844) 320-5338 for a free estimate.
Written by the team at Envelope Insulation Co.