Fast, Reliable Spray Foam Insulation Across Boulder City
If you own one of the older homes here, you already know the attic runs hot by May and cold by December. We do spray foam work across Boulder City with a clear process: air sealing first, then insulation, then a blower-door reading you can compare against the starting number. Our technicians have up to 10 years of experience, and we answer calls 24/7 with a live person. Call (844) 320-5338 for a written price before any work starts.
Why Envelope Insulation Henderson Is Boulder City’s Preferred Spray Foam Insulation Company
Most of the calls we take in Boulder City involve homes that were never designed for modern insulation. The Federal Housing Administration-era stock built to a Depression-era company-town standard has shallow attics, unvented cavities, and exterior walls the historic district will not let you change. Our technicians have up to 10 years of experience working with exactly this kind of building. That means low-profile equipment, custom baffles, and no exterior changes that trip review.
Since 2016 we’ve sealed and insulated more than 9,000 homes under The Haven Standard. Every one of those jobs started with a written price and a written scope, and every one ended with a Documented Photo Record. The 365-Day Done Right Promise applies to all completed work. If you bring us a competing written estimate, we’ll read it with you as a free second opinion before you sign anything.
Boulder City sits 26 miles from the valley floor and we treat the drive as routine. Calls to our line go to a live person around the clock. Technicians are background-checked and arrive in uniform.
Our Spray Foam Insulation Services in Boulder City

Closed-Cell Spray Foam
Closed-cell is the right choice for most Boulder City retrofits because it adds structural rigidity and blocks vapor, which matters on the masonry-and-wood construction common in the 89005 ZIP. We spray against the roof deck or into wall cavities where the depth allows, and we calculate the cure schedule based on the day’s temperature. On a 105°F afternoon, that schedule is shorter than you’d expect.

Rim Joist Spray Foam
The rim joist is where the floor frame meets the foundation, and it’s a top source of air loss in these raised-foundation bungalows. We seal the rim joist with closed-cell foam as part of the air-sealing pass before any cavity insulation goes in. On homes near the airport side of town, that slab of the envelope takes a hard wind off the McCullough Range in winter and needs a continuous seal.

Spray Foam Roof Deck
Applying foam directly to the underside of the roof deck turns the attic into conditioned space, which is how you fix a shallow attic without fighting for depth. The key word is “properly”: we install baffling first to maintain soffit ventilation before we spray. Skipping that step on a 1930s roof is how you get sheathing rot.

Garage Ceiling Spray Foam
Detached and attached garages on the historic grid often share a wall with the house and pull conditioned air straight through it. Foaming the garage ceiling keeps the main living space out of contact with the garage’s temperature swing. We treat it the same as any other part of the envelope: sealed first, insulated second.
Explore the full Spray Foam Insulation service line if you want the wider picture on materials, thickness thresholds, and blower-door documentation.
Trusted Brands We Service in Boulder City
We use spray foam products from Icynene and Demilec, along with Owens Corning and Johns Manville where fiber materials belong in the assembly. We aren’t tied to any proprietary product, so the recommendation follows the building, not the vendor. If your existing foam was installed by someone else and you want it evaluated, we’ll look at adhesion, off-gassing, and moisture before we touch it. Turnaround is fast and the material selection is documented in your written scope.
Common Spray Foam Insulation Problems We See in Boulder City Homes

- Foam sprayed to a 1930s roof deck without baffling. Closed-cell foam applied straight to the underside of an old deck traps moisture against the sheathing, and Boulder City’s occasional winter rain finds that trapped moisture fast. Once rot starts in the deck boards, the fix goes well past insulation.
- Adhesion failure on adobe and masonry. Two-component foam sprayed onto dusty adobe or masonry wall surfaces common in the original bungalows will delaminate. Surface prep and a primer coat on those substrates are not optional steps.
- Over-spray blocking soffit vents in shallow attics. In a peak under 24 inches, a heavy hand on the gun can close the already minimal soffit vents. That makes attic heat buildup worse during 100°F+ summers, not better.
- Foam installed before air sealing. Blowing foam over an unsealed floor or rim joist leaves top plates and penetrations leaking, and the blower-door number barely moves. Sealed first, then insulated is the only order that works.
Pricing for Spray Foam Insulation in Boulder City, NV
Here is the honest range. Closed-cell spray foam in Boulder City typically runs $1.50 to $3.25 per board foot installed, and open-cell runs $0.90 to $1.75 per board foot. Rim joist sealing on a standard bungalow usually lands between $650 and $1,400, and a full roof-deck application on a 900 to 1,300 square foot home typically comes in between $3,800 and $8,500. Garage ceilings run $900 to $2,200. What moves the number: cavity depth, substrate condition, baffling complexity in shallow attics, and whether historic review applies. You get a written price before any work starts, and the estimate is free. Call (844) 320-5338.
We Also Serve Cities Near Boulder City

The same crew and the same Haven Standard apply across the surrounding area. We work regularly in Henderson, Whitney, Paradise, and Enterprise. If you’re comparing contractors across lines, you’ll find our Spray Foam Insulation in Boulder City page lays out how the process differs from the newer stock in neighboring cities. Same written price, same photo record, same blower-door readings.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Spray Foam Insulation in Boulder City

Yes. Foam on the underside of the roof deck is invisible from the street, so it typically passes review where exterior changes would not. The work is interior: low-profile equipment, custom baffling to preserve soffit airflow, and closed-cell applied against the deck. We keep the exterior envelope visually unchanged, which is exactly what the historic district cares about.
Closed-cell foam with a primer coat on the substrate works best on adobe and masonry. Those surfaces are dusty and porous, and foam sprayed without prep will delaminate. Closed-cell also blocks vapor, which matters on the older constructions. We assess the wall surface before we spec anything.
The swing matters less once foam is in than it does during installation. Boulder City runs above 100°F in summer and drops to cold nights in winter, and closed-cell handles both directions well because it’s a rigid, vapor-blocking assembly. The real variable is the install day: foam cure time shifts with temperature and humidity, and we schedule for it.
Yes, and this is the part generic pages miss. The original attics are often under 24 inches at the peak and unvented. Adding foam without maintaining soffit ventilation is how you get moisture trapped against a 1930s roof deck and sheathing rot. Baffling comes first, before any foam goes up. Call (844) 320-5338 and we’ll walk you through what your attic can take.
Icynene and Demilec are the two we reach for most often on this housing stock. Both work well in shallow cavities and on retrofits where adhesion and moisture control are the priority. We aren’t locked into either, though. Your scope lists what we’re installing and why. Estimates are free.
Written by the team at Envelope Insulation Henderson.